How High-Performance Doors Keep Your Manufacturing Facility Productive in Extreme Climates

If you run a manufacturing facility, you would know that one of the biggest challenges is maintaining the room temperature, especially in extreme climates. Like your car’s engine, your facility needs it to work efficiently.

However, with global warming at its peak, many cities grapple with extreme climates. Last year, the Reno-Sparks area witnessed the coldest winter since 2008, with more than eight inches of precipitation (8.08″) and almost 26 inches of snowfall (25.8″).

How do you keep your facility running smoothly in this climate?

While every facility has unique needs, commercial high-performance doors are a simple and effective solution to this challenge.

At Thompson Garage Doors, we offer a selection of high-performance rolling sectional doors. No matter your industry, your facility can benefit from replacing the old doors with new, energy-efficient doors.

Let’s find out how.

Table Of Content

1. How Extreme Climates Affect Your Manufacturing Facility
2. How High-Speed Industrial Doors Combat These Challenges
3. Features of High-Performance Doors
4. Benefits of High-Performance Doors in Extreme Climates
5. Which High-Performance Doors Do You Need for Different Climates?
6. Get High-Performance Doors for Your Facility

Boost Your Facility’s Productivity!

How Extreme Climates Affect Your Manufacturing Facility

Nevada has a diverse climate with dry air, light precipitation, moderate to heavy snowfall, and notable temperature changes. Whether in Reno or Sparks, your facility must survive extreme climates. Both summers and winters in these areas can be brutal.

Without commercial high-performance doors, your facility could face two problems:

How High Heat Affects Garage Doors

Extreme heat is perhaps the worst enemy of a manufacturing facility. For one, it makes your HVAC system work harder than usual, which can skyrocket your bills.

Second, high temperatures can cause your equipment to overheat – and potentially damage your products and equipment – disrupting the entire manufacturing process. This unplanned downtime can lead to costly repairs.

Your workers will also bear the brunt of high temperatures. Excessive heat can lead to safety hazards, which can slow down your production or even cause accidents. But all this can be avoided if you keep the indoor temperature in check, which becomes easier with energy-efficient doors.

How Cold Affects Garage Doors

Like heat, cold weather brings its own set of problems. In the cold weather, your HVAC system will need to work harder to keep your facility from freezing. Cold can cause condensation, which can lead to moisture damage – rust and rot.

There’s also the risk of pipes freezing and bursting. If this happens, it can bring your production to a standstill. Repairing damaged equipment or pipes is usually very expensive and time-consuming.

Install energy-efficient doors wherever possible. Investing in the best garage door insulation for cold climates will do a lot to avoid these problems –  especially for closed parking areas or loading docks. This will help you save on energy bills.

How High-Speed Industrial Doors Combat These Challenges

As garage door repair experts in Sparks, NV, we recommend installing high-performance doors to improve operational efficiency. These doors offer a few unique features that regular doors cannot – and can tackle climate-related issues head-on for smooth operation.

Upgrade Your Manufacturing Facility’s Doors!

Features of High-Performance Doors


To combat extreme weather, investing in the best garage door insulation for cold climates will serve you well for years to come. This keeps the indoor air cool during hot weather and warm during cold winters – which will help increase the efficiency in your HVAC system. 


Proper sealing is a key feature of these types of doors to prevent room-temperature air from escaping outside.

High-Performance Roll

These high-speed doors are designed to operate quickly so the temperature-controlled air from inside is not released.


These doors – designed for high-traffic areas –are built to withstand harsh weather conditions. Whether it’s a scorching summer day or a freezing winter night, these doors can handle it all – not to mention add a layer to your facility’s security.

Benefits of High-Performance Doors in Extreme Climates

Improved Temperature Control

The biggest benefit of these high-speed roll-up doors is the energy savings. High-performance doors are remarkably effective in maintaining indoor temperatures. That means your facility runs smoothly, even if the outdoor temperature is extremely hot or cold.

Energy Efficiency

This may seem obvious, but better temperature control translates into energy savings. These energy-efficient doors help reduce heat transfer and minimize air infiltration. After installing these doors, you may see a noticeable drop in your energy bills.

Reduced Risk of Equipment Damage

With enhanced temperature control, you reduce the risk of overheating or freezing your equipment and products. That means fewer breakdowns and financial losses.

Better Comfort and Safety

Comfort and safety in industrial environments can do wonders to boost employee morale and productivity. It also prevents accidents that are more likely to happen in extreme heat or cold.

Optimize Your Manufacturing Efficiency!

Which High-Performance Doors Do You Need for Different Climates?

Choosing high-performance doors is not as easy as selecting contemporary garage doors. It’s not just the looks. You have to think about functionality and durability first. Choosing these doors depends on your climate. As mentioned, the climate in the Reno and Sparks area can be very cold or hot, depending on the season.

So, you need to select doors that can withstand both climates in industrial settings:

Hot and Humid Climates

You will need doors with excellent insulation and fast operation for both hot and humid climates. It will keep the cool air inside and the hot, humid air outside. In other words, all industrial facilities need energy-efficient doors in these settings to help lower cooling costs.

Cold and Snowy Climates

In cold and snowy climates, your facility needs doors with superior insulation and sealing to reduce heating costs – and prevent condensation and moisture damage. You might also consider doors with heated edges to prevent ice buildup.

Get High-Performance Doors for Your Facility

Getting the best and safest high-performance doors for your facility is not a luxury – it’s a necessity. These doors offer exceptional insulation, sealing, fast operation, and durability. They help you save on energy costs, maintain a consistent environment, protect your equipment and products, and promote worker safety.

Don’t let extreme climates disrupt your production. Get energy-efficient doors for your facility now.

Do you need high-performance doors?

Thompson Garage Doors is here to help. We have served commercial facilities in Northern Nevada and Northern California since 1957. Get in touch to learn more about high-speed door applications and how they improve industrial facilities.

Reach out to us today for more details!